Unistar Aqua Tech Private Limited

Hardness is a chemical parameter of water that represents the total concentration of calcium and magnesium ions. It is called hardness because if calcium and magnesium are present in your water, making a lather or suds for washing is "hard" to do.

Another negative aspect of hard water is the capacity to produce scale, primarily caused by calcium and magnesium salts. Hardness is usually expressed in grains per gallon or parts per million (ppm) as calcium carbonate equivalent. The degree of hardness standard as developed. The softener plant degining capacity 100 to 10,00,000 Ltr. Per Day depend on water property with water your requirement. Water Hardness exist in significant areas of the country that result in disappointing white scales on fixtures, appliances and piping. Softening of water produces immediate benefits such as reduced usage of soap and detergent, cleaner clothes and better taste of food and beverages.

·         Low maintenance cost

                    Reduces electricity bill.

                    Reduces cooking time and consumption of gas.

                    Prevent scaling on human skin & stop hair loss.

                    Save up to 70% of detergent & soap in washing process.
         
                    Prevent Scaling & corrosion in pipelines and bathroom fittings.

                    Prevent Scaling in boilers, geysers, heat exchangers, press, etc.

Product Details:

Unistar industrial Waste Water Treatment Plants (ETP)

Any client who desires to receive a quote for a plant for an Akar Effluent Treatment plant must provide the following details. Industrial Waste Water Treatment Plants

Water Quality

Parameter Unit

BOD ppm

COD ppm

Total Susp. Solids (TSS) ppm

Total dissolved solids (TDS) ppm

Turbidity ppm

Ph -----

Odour -----

Colour -----

Oil Grease content ppm

Heavy metals ppm

Iron as Fe ppm Unistar has designed, supplied, installed and commissioned many Industrial Waste Water Treatment Plants (Effluent Treatment Plants) for a variety of industries. Akar's plants cater to the following industries

Textile Mills
Pharmaceutical industries
Dairies
Food Processing Industries
Large Kitchens (hotels and catering businesses)
Leather processing industries
Steel Mills
Electrical and Electronic industries
Paper Mills
Sugar Industries
Electroplating Industries
Anodising plants
Vegetable Oil Processing UnitsOil refineries

Each industry has its own specific characteristics, challenges and requirements. We give below the diverse characteristics', challenges and requirements of different industries based on our experience of working with such industries.

Dairy, Food Processing Industries And Large Kitchens

Unistar has supplied their plants and equipment to many reputed dairies and milk processing units. Typical challenges faced by dairy units are treatment of fat wasted apart from high oil, BOD and colour. Usually primary, secondary and tertiary treatments are required to treat Waste Water from dairies.

Pharmaceutical Industries

Unistar has supplied several Industrial Effluent Treatment Plants to a number of pharmaceutical companies in India and outside. Dabur India Ltd. is one of our main customers. We have supplied four Industrial Effluent Treatment Plants to them. apart from that M/s

Waste Water Treatment for pharmaceutical industries is very tricky subject. Primarily this is because, the formulations vary, because of which the quality of Waste Water varies substantially from time to time and therefore guaranteeing the results is not simple and many times not possible. Treatment and dosages may have to be varied depending upon parameters of the effluent.

Steel Mills

Unistar has supplied Waste Water Treatment Plant to one of the largest manufacturers of steel in India viz. M.s SAIL (Steel Authority of India). the plant has been in operation in SAIL for the past five yers successfully. Akar has also supplied Waste Water Treatment Plants to some other steel mills and units such as Modi Steel Mills Ltd., BMM Ispat Ltd. etc.

Unstar Textile Mills Effluent Treatment (ATMET) Plant
Textile Dyeing Industry releases waste water (Effluent) with comparatively higher toxins in the form of chemicals. Due to the fact that dyes and other additives not only increase the pollution loads in the waste water, but also alter colour of the effluent; treatment of textile dyeing waste water is critical and complex.
Unistar has supplied numerous Textile Waste Water Treatment Plants in India and in many parts of the world. Amongst our clients are reputed companies ain India and outside. We have supplied these plants to India, Bangladesh, Pakistan, Sri Lanka, Jordan, Egypt, African countries such Sudan, Tchad, Ethiopia and others.

We also deal in various types of wwtp plants such as Textile Wastewater Treatment Plant , Chemical wastewater treatment plant , Wastewater treatment system ,Residential Wastewater Treatment Plant , pharmaceutical wastewater treatment plant , Domestic wastewater treatment plant ,biological wastewater treatment plant , Municipal Wastewater Treatment Plant.

Additional Information:

• Delivery Time: With inWeek
• Packaging Details: Standard Packing